Q2S Laser RADAR
Q2S Laser RADAR for multi-point structural monitoring
Measure vibration simultaneously at 65 fixed points across a structure—with no mechanical scanning.
Q2S combines remote, non-contact vibration measurement with 3D geometry to support repeatable monitoring of bridges, infrastructure and other large structures.
Measure vibration simultaneously at fixed points across the structure
Q2S uses 65 parallel channels to acquire repeatable measurements across a defined field of view. Because the points are captured simultaneously, the instrument does not rely on mechanical scanning to build the response.
Fixed measurement points
A stable optical geometry keeps the same points in view for repeatable measurements and monitoring.
Simultaneous multi-point capture
All 65 channels measure in parallel at up to 40 kHz per channel in the standard configuration.
Non-contact and remote
Observe structural response without attaching sensors to the measurement points.
From vibration response to structural health
Q2S connects dynamic response with geometry so teams can measure movement, reconstruct structural behaviour and monitor changes over time.
1. Measure
Capture vibration at 65 points simultaneously, including velocity and derived displacement.
2. Reconstruct
Use geometry-linked data to interpret spatial structural behaviour and strain.
3. Monitor
Repeat the same fixed-point measurement geometry for continuous or long-term observation.
Built for bridges and long-term structural monitoring
Q2S is designed for fixed installations where structural response must be captured repeatedly without contact. Its simultaneous channels and integrated environmental compensation support bridge, infrastructure and continuous monitoring workflows.
- Atmospheric compensation using pressure, temperature and humidity
- IP54 enclosure and 0–40 °C operating range
- Up to 240 minutes of battery operation
From velocity to displacement and strain
Q2S measures vibration velocity with a sensitivity below 50 nm/s/√Hz. Geometry-linked processing supports displacement sensitivity below 0.1 nm and strain sensitivity below 1 µstrain.
For high-speed or extended-range measurements, the modular SpeedSync configuration reaches sampling rates up to 125 MHz, velocities up to ±47.9 m/s and distances from 0.3 to 300 m.
Q2S technical specifications
Standard Q2S operation covers 0.5–50 m. Modular SpeedSync configurations extend the measurement range to 0.3–300 m.
Measurement
| Standard distance range | 0.5–50 m |
|---|---|
| Optical focus | Fixed, 0.5–50 m |
| Factory field of view | 12°, 30° or 62° |
| Vertical angular range | 30° |
| Vertical measurement points | 65–1300 |
| Parallel channels | 65 simultaneous |
| Standard sampling | 40 kHz per channel |
| Standard maximum velocity | ±155 mm/s |
Sensitivity and SpeedSync
| SpeedSync sampling | Up to 125 MHz |
|---|---|
| SpeedSync maximum velocity | ±47.9 m/s |
| SpeedSync distance range | Modular, 0.3–300 m |
| Velocity sensitivity | <50 nm/s/√Hz |
| Strain sensitivity | <1 µstrain |
| Displacement sensitivity | <0.1 nm |
| Wavelength | 1550 nm |
| Signal stability | SpeckleGuard |
System and data
| Operating temperature | 0–40 °C |
|---|---|
| Protection and laser class | IP54; Class 1M |
| Power consumption | 20 W |
| Battery operation | Up to 240 minutes |
| Dimensions | 382 × 228 × 150 mm |
| Mass | 5.0 kg without battery |
| Mount | 3.5 in–8 TPI |
| Data and software | GigE; Atelier and OmmViewer; HDF5, UFF, UNV and CSV |
Q2S questions
The essentials for evaluating a fixed-array structural monitoring workflow.
Q2S is a fixed-array Laser RADAR with 65 parallel channels for simultaneous, non-contact vibration measurement.
It measures vibration velocity and supports displacement and strain analysis linked to 3D geometry.
The brochure identifies bridges, infrastructure, buildings and other large structures, including continuous and long-term monitoring.
Plan a Q2S structural monitoring workflow
Share the structure, measurement distance and monitoring objective. We will help define the appropriate Q2S configuration.
Q2S 结构监测常见问题
Q2S 将 65 点同步振动测量与固定几何相结合，支持可重复的结构监测。
Q2S 测量什么？
Q2S 同步测量 65 个固定点的振动，并将响应与 3D 几何关联。速度、推导位移、空间行为和应变数据可用于评估桥梁、基础设施和其他大型结构。
Q2S 的测量速度和灵敏度是多少？
标准配置并行采集 65 个通道，每通道最高 40 kHz。振动速度灵敏度低于 50 nm/s/√Hz；结合几何处理，位移灵敏度低于 0.1 nm，应变灵敏度低于 1 µstrain。
Q2S 如何支持可重复的户外监测？
固定光学几何可在重复或连续观测中回到相同测点。IP54 外壳、0–40 °C 工作范围和集成环境补偿支持桥梁与基础设施的长期固定安装。
Q2S 支持哪些距离和速度范围？
标准工作距离为 0.5–50 m。模块化 SpeedSync 配置可将距离扩展到 0.3–300 m、采样率扩展到 125 MHz、可测速度扩展到 ±47.9 m/s。